Since 2004 · Engineering Excellence, Without Limits
Two-component spraying equipment
Introduction:
- It is applied to the spraying of the two-component liquid material, to achieve the online ratio of how much to mix, reduce the curing waste of the AB two-component liquid material in advance, and reduce the maintenance rate of the equipment being cured and blocked. Custom different configurations can meet different volume ratios.
- Spray type can be selected: air spraying, air assisted airless spraying, airless spraying.
- Optional with different spray gun and host system, can be realized: automatic spraying or manual spraying.
- Different matching methods can be selected: the electronic ratio of the PLC precise control, and the mechanical ratio with low requirements for mixing mixing accuracy.
- Most of the online mixing and stirring devices are placed in the main engine system or pipeline, and the fast-curing liquid material can be selected into the front end of the gun, mixing inside the gun, and mixing outside the gun.
- Optional safer and more explosion-proof heating method: remote hot oil circulation heating.
Reference diagram of two-component spraying equipment system:
Electronic proportioning two-component spraying equipment system (mixed at the end of the machine)
Electronic proportioning two-component spraying equipment system (gun end mixing)
Electronic proportioning two-component spraying equipment system (pump end mixing)
Mechanical ratio two-component spraying equipment system (mixed at the machine or gun)
Mechanical ratio 1:1 heating type two-component pump
Mixed two-component spray gun outside the gun
Mixed two-component spray gun
Two-component automatic gun valve
Table of Two-Component Spraying Equipment Models and Main Parameters:
| Model | 2Tanks-G2K-e-S | 2Tanks-P2k-e-S | 2Tanks-P2k-e-S-Pump | 2Tanks-JXP2K-S |
| volume ratio | 1：1-7：1 or 8：1-15:1 | 1：1-7：1 or 8：1-15:1 | 1：1-7：1 or 8：1-15:1 | 1：1-6:1 or 7：1-12：1 |
| Viscosible | Air spray / less than 50 seconds AA spray / less than 200 seconds | Air Spraying / Below 50 Seconds AA/AL Spraying / 200 Seconds or less | Air Spraying / Below 50 Seconds AA/AL Spraying / 200 Seconds or less | less than 200 seconds |
| mixing position | machine end or pipe or gun end | machine end or pipe or gun end | Spray pump end | machine end or pipe or gun end |
| spray method | Air Spray or AA Spray | Air or AA or Al spray | Air or AA or Al spray | AA spray or Al spray |
| hard filler | Can’t contain | Can be in a small amount | Can be in a small amount | Can be in a small amount |
| rationing error | + – within 2% | + – within 2% | + – within 2% | + – within 6% |
| ratio control | PLC precision control | PLC precision control | PLC precision control | mechanical control |
| atmospheric pressure | Host 1-2Bar Gun 2-6BAR | Host 1-2Bar Gun 2-6BAR | Host 1-2Bar Gun 2-6BAR | 3-6Bar |
| On-site air source | Displacement≥0.5m³/min | Displacement≥0.5m³/min | Displacement≥1.5m³/min | Displacement≥1.5m³/min |
Examples of two-component spraying application scenarios
large ship spraying
Large marine facility spraying
Large steel structure spray
Mechanical Heavy Works Spraying
Note: Due to continuous product updates and varying user configurations and requirements, the final product may differ from the images on this webpage. The images and text on this webpage are for reference only.