Two-component glue machine

Introduction:

• Product Name: Two-component glue applicator, glue applicator, glue dispensing machine, glue injection machine, glue spraying machine, glue applicator.
• Depending on whether the rubber compound needs to be heated, there are two types of machines: heated and unheated.
• Based on the power source, they can be divided into pneumatic and electric types. The electric type uses PLC for precise control and can perform online quantitative measurement.
• Applicable adhesive viscosity: The highest formulation is suitable for two-component adhesives with a viscosity of 850,000 mPa·s (cp) or below, or a viscosity after heating of 850,000 mPa·s (cp). For adhesives with higher viscosity, heating is generally used to reduce the viscosity for easier application.
• Suitable for two-component adhesives containing little or no hard microfillers.
• Different models can be customized for use with 2, 3, 4 or more components.
• By selecting different configurations and controls, the shape of the adhesive strip can be round, flat, curtain-like, or other special shapes.

Common models and main parameters of electronic two-component glue dispensing machines:

Model (Standard Temperature)	2Tanks-G2K-eG (Tank Type)	2Platens-G2k-eG (Plate Type)	2Tanks-P2K-e-G	2Platens-P2k-e-G
Model (Heating)	2Tanks-G2K-e-G-HOT	2Platens-G2k-e-G-HOT	2Tanks-P2K-e-G-HOT	2PlatensP2k-e-G-HOT
Adhesive supply method	Barrel pressurization	Apply pressure using a small or large pressure plate.	Barrel pressurization	Pressurization by pressure plate or pressure plate pump
volume ratio	1：1-15:1	1：1-15:1	1：1-15:1	1：1-15:1
Adaptable viscosity (High-end unit/at room temperature or after heating)	Below 100,000 cp (mPa.s)	Below 850,000 cp (mPa.s)	Below 100,000 cp (mPa.s)	Below 850,000 cp (mPa.s)
Proportioning error	Within +/- 2%	Within +/- 2%	Within +/- 2%	Within +/- 2%
Control Form	PLC Precision Control	PLC Precision Control	PLC Precision Control	PLC Precision Control
adhesive strip shape	Choose one: round strip/flat strip/curtain	Choose one: round strip/flat strip/curtain	Choose one: round bar or flat bar	Choose one: round bar or flat bar
Hard filler	Cannot contain	Cannot contain	It can contain a small amount	It can contain a small amount
Pressure plate size	none	Choose either 285mm or 575mm	none	Choose either 285mm or 575mm
External dimensions (width, depth, height)	Approximately 98 cm tall.	Approximately 90, 110, 140cm	Approximately 98, 130, 150cm	Approximately 200cm, 190cm, and 160cm.
Use air pressure	1-2 Bar	3-6 Bar	1-2 Bar	3-6 Bar
Gas source displacement	0.3m³/min	≥0.5m³/min	0.3m³/min	≥0.5m³/min
field power	For power above 3KW, the price will be determined based on the rubber compound.	For power above 3KW, the price will be determined based on the rubber compound.	For power above 3KW, the price will be determined based on the rubber compound.	For power above 3KW, the price will be determined based on the rubber compound.

Note: For each machine, the volume ratios above should be selected within a more specific range. The range of volume ratios used on a single machine should not be too large.

Reference diagram of electronic mixing two-component glue machine system and accessories:

Glue coating machine and glue coating nozzle

Introduction:

• Suitable for extra-wide workpieces and large-area coating.
• The adhesive strips are either densely arranged in thin strips and evenly distributed, or coated as a single, curtain-like sheet.
• Applicable adhesive viscosity: The highest configuration is suitable for adhesives with a viscosity of 100,000 mPa·s (cp) or below, or whose viscosity after heating is 100,000 mPa·s (cp). For adhesives with higher viscosity, heating is generally used to reduce the viscosity for easier application.
• Utilizing precise PLC control, the two-component adhesive is mixed and stirred online, resulting in uniform, rapid, and efficient dispensing. It interconnects with production lines to achieve automated and highly efficient adhesive application.

Note: As the product is constantly updated and each user’s configuration and requirements are different, the final product may differ from the images on this webpage. The images and text on this webpage are for reference only.