Single-component glue machine

Introduction:

• Product Name: Single-component glue applicator, glue applicator, glue dispensing machine, glue injection machine, glue spraying machine, glue applicator.
• Depending on whether the rubber compound needs to be heated, there are two types of machines: heated and unheated.
• Based on the power source, they can be divided into pneumatic and electric types. The electric type uses PLC for precise control and can perform online quantitative measurement.
• Applicable adhesive viscosity: The highest formulation is suitable for single-component adhesives with a viscosity of 850,000 mPa·s (cp) or below, or a viscosity after heating of 850,000 mPa·s (cp). For adhesives with higher viscosity, heating is generally used to reduce the viscosity for easier application.
• Suitable for single-component adhesives containing little or no hard microfillers.
• By selecting different configurations and controls, the shape of the adhesive strip can be round, flat, curtain-like, or other special shapes.

Single-component glue applicator models and main parameters:

Model (Non-heating type)	DJE1K-P285/575 (Electric/Plate Type)	DJE1K-T30L (Electric/Barrel Type)	DJ285B (Pneumatic/Small pressure plate)	DJ575 (Pneumatic/Large Pressure Plate)
Model (Heating Type)	DJE1K-P285/575-HOT (Electric/Plate-type/Heating)	DJE1K-T30L-HOT (Electric/Barrel-type/Heated)	DJ285B-HOT (Pneumatic/Heating)	DJ575-HOT (Pneumatic/Heating)
pneumatic pressure ratio			72：1	72：1
Pump outlet pressure range	0-250Bar	0-250Bar	0-432Bar	0-432Bar
adhesive strip shape	Choose one: round strip/flat strip/curtain	Choose one: round strip/flat strip/curtain	Choose one: round bar or flat bar	Choose one: round bar or flat bar
Suitable viscosity (high-performance machine/at room temperature or after heating)	Below 850,000 cp	Below 100,000 cp	Below 850,000 cp	Below 850,000 cp
Lifting method	Pneumatic double column	none	Pneumatic double column	Pneumatic double column
Pressure plate size	Choose either 285mm or 575mm (5 gal or 55 gal)	none	285mm（5 gal）	575mm (55 gal)
Weight (kg)	Approximately 150 or 250	Approximately 150	Approximately 115	Approximately 200
External dimensions (cm) (Width, Depth, Height)	Approximately 70*85*140 (5gal) Or 98*108*146 (55gal)	Approximately 70*85*135	Approximately 75*70*120	Approximately 98*78*146
External power source	Power supply 380V or 220V	Power supply 380V or 220V	Gas source 3-6 Bar	Gas source 3-6 Bar
On-site power source	Power supply capacity 1.5KW and above According to the rubber compound, the specific details are pending.	Power supply capacity 1.5KW and above According to the rubber compound, the specific details are pending.	Gas source displacement ≥1m³ /min	Gas source displacement ≥1m³ /min

Reference images of standard glue applicators and accessories:

Glue coating machine and glue coating nozzle

Introduction:

• Suitable for extra-wide workpieces and large-area coating.
• The adhesive strips are arranged in dense, thin strips, or formed as a single curtain-like structure covering the entire surface.
• Applicable adhesive viscosity: The highest configuration is suitable for adhesives with a viscosity of 100,000 mPa·s (cp) or below, or whose viscosity after heating is 100,000 mPa·s (cp). For adhesives with higher viscosity, heating is generally used to reduce the viscosity for easier application.
• It typically employs PLC precision control, ensuring uniform and rapid glue dispensing and efficient glue collection. It interconnects with production lines to achieve automated and highly efficient glue application.

Note: As the product is constantly updated and each user’s configuration and requirements are different, the final product may differ from the images on this webpage. The images and text on this webpage are for reference only.